JM36/JMD36 Series Gantry Type Double-point Press with High Performance

Overview

· Eight-side lengthened guide with high precision.

· Electric shut height adjustment with digital display.

· Equipped with lifting balance cylinder.

· Duplex valves imported from Japan.

· Electric compelling grease lubrication system.

· Controlled by PLC of international brand.

· Buttons, indicators, AC contactors, air circuit breakers and other controlling devices are used international brand.

· Electronic cam device with intelligent top dead center stop function and several safety function.

· Optional air cushion device, NC feeding machine, light curtain and inverter of international brand to fulfill stroke adjustment.

· JMD36 series equipped with multi pitmen framework, suitable for flat stretching.

JM36-250

Technical Parameters

Model No.		Unit	JM36-110 JMD36-110	JM36-160 JMD36-160	JM36-200 JMD36-200	JM36-250 JMD36-250	JM36-315 JMD36-315	JM36-400	JM36-500
nominal force		Kn	1100	1600	2000	2500	3150	4000	5000
stroke under nominal force		mm	5	6	7	8	8	10	10
slide block stroke		mm	180	200	250	280	280	280	280
number of stroke	fixed	min^-1	50	45	35	30	25	20	18
number of stroke	variable(optional)	min^-1	35-65	30-55	25-45	20-35	20-30	18-25	15-20
max die set height		mm	400	450	500	550	600	650	700
die set height adjustment		mm	90	100	110	120	120	120	120
worktable dimensions(F.B×L.R)		mm	680×1650	760×1850	840×2200	920×2300	1000×2400	1100×2500	1200×2900
thickness of bolster		mm	130	150	170	180	190	200	210
dimensions of slide block bottom surface(F.B×L.R)		mm	580×1360	660×1580	740×1850	820×2000	900×2100	1000×2200	1100×2600
size of the handle hole(diameter×depth)		mm	3-φ60×70	3-φ60×75	3-φ60×90	3-φ60×90	3-φ70×95	3-φ70×95	3-φ80×100
distance between columns and body		mm	1750	1970	2300	2500	2600	2700	3100
dimension of side hole(F.B×H)(calculation from surface of worktable)		mm	650×350	700×380	800×420	860×470	900×500	1020×550	1040×600
distance between upper surface of bolster and ground		mm	950	970	1000	1100	1120	1120	1150
main motor power		Kw	15	18.5	22	30	37	45	55
cushion (optional)	number		2	2	2	2	2	2	2
	knock out force	Kn	55	80	100	125	125	125	125
	knock out stroke	mm	70	80	90	100	100	100	100
	knock out area	mm	370×520	420×620	470×720	520×820	520×820	520×820	520×820
outline dimension(F.B×L.R×H)		mm	2250×2370 ×3500	2480×2590 ×3610	2680×3120 ×3930	2880×3370 ×4280	3220×3520 ×4580	3310×3640 ×4580	3880×4080 ×4750
G.W.		Kg	21000	26000	33000	42000	49000	55000	68000

Related Products