This product has been off the shelf!
IW Series Hydraulic Iron Worker
Product Description
50Overview
Technical Parameters
| Model No. | IW66 | IW90 | IW120 | IW160 |
| working pressure | 550Kn | 750Kn | 1100Kn | 1400Kn |
| max. cutting thickness | 16mm | 20mm | 25mm | 26mm |
| max. cutting length | 400mm | 480mm | 600mm | 600mm |
| tensile strength of sheet metal | ≤450N/mm2 | ≤450N/mm2 | ≤450N/mm2 | ≤450N/mm2 |
| shear angle | 7° | 8° | 8° | 8° |
| stroke of ram | 80mm | 80mm | 80mm | 80mm |
| stroke times | 8min | 8min | 8min | 8min |
| depth of throat | 300mm | 355mm | 400mm | 600mm |
| max. capacities | 25×16mm | 30×20mm | 35×25mm | 38×26mm |
| main motor power | 4Kw | 5.5Kw | 7.5Kw | 11Kw |
| length of machine | 1640mm | 1860mm | 2355mm | 2680mm |
| width of machine | 730mm | 790mm | 960mm | 1040mm |
| height of machine | 1770mm | 1900mm | 2090mm | 2300mm |
| G.W. | 1700Kg | 2200Kg | 4800Kg | 6200Kg |
* A special order for the I-bar, T-bar and channel moulds needed
| profile | round bar | square bar | equal angle | T-bar | I-bar | channel | ||
90° shearing | 45° shearing | 90° shearing | 45° shearing | |||||
| section view | ||||||||
| Q35Y-16 | 45 | 40×40 | 125×125×12 | 50×50×5 | 120×120×12 | 60×60×8 | 126×74×5 | 126×53×5.5 |
| Q35Y-20 | 50 | 50×50 | 140×140×12 | 50×50×5 | 140×140×12 | 70×70×10 | 160×86×6 | 160×60×6.5 |
| Q35Y-25 | 60 | 50×50 | 160×160×14 | 60×60×6 | 160×160×14 | 80×80×10 | 200×102×9 | 200×75×9 |
| Q35Y-30 | 65 | 55×55 | 180×180×16 | 60×60×6 | 180×180×16 | 80×80×10 | 280×124×10.5 | 280×86×11.5 |