This product has been off the shelf!

BL-1340D/BL-1440D Precision Gearhead Lathe

Overview

· No change gear in tool box.

· The thread category complete, not only cutting metric thread and imperial thread, but also cutting diametral thread and module thread.

· Minimum Cross feed 0.01mm/rev, Minimum Longitudinal feed 0.046mm/rev.

Technical Parameters

Model No.	BL-1340D	BL-1440D
swing over bed	330mm(13")	360mm(14")
swing over cross slide	198mm(7-25/32")	224mm(8-13/16")
swing in gap diameter	476mm(18-3/4")	502mm(19-3/4")
length in gap	210mm(8-1/4")
center height	166mm(6-1/2")	179mm(7")
distance between centers	750mm(30") or 1000mm(40")
spindle bore	38mm(1-1/2") or 40mm(1-9/16")
spindle nose	D1-4 or D1-5
taper in nose	No5 morse
speeds number	8
speeds range	70-2000r/min
cross slide travel	170mm(6-11/16")
compound rest travel	95mm(3-9/16")
lead screw thread	8T.P.I. or 3mm pitch
feed rod diameter	19mm(3/4")
cutting tool max section	16mm×16mm(5/8"×5/8")
threads imperial pitches	42 Nos. 4-112T.P.I
threads metric pitches	44 Nos. 0.1-7mm
threads diametral pitches	25 Nos. 16-112DP
threads module pitches	34 Nos. 0.1-1.75MP
longitudinal feeds imperial	24 Nos. 0.00168-0.1175"/rev
longitudinal feeds metric	24 Nos. 0.046-3.249 mm/rev
cross feeds imperial	32 Nos. 0.00046-0.03231"/rev
cross feeds metric	24 Nos. 0.01-0.703 mm/rev
quill diameter	32mm(1-1/4") or 42mm(1-21/32")
quill travel	100mm(3-15/16")
quill taper	MT3
main motor power	1.5Kw (2HP)
coolant pump power	40W (1/16HP)
packing size	168×76×153cm(750mm) or 193×76×153cm(1000mm)
N.W./G.W.	510/630Kg(750mm) or 540/645Kg(1000mm)

Standard Accessories

Optional Accessories

quick change tool post	turning tools	taper turning attachment	digital readout
leadscrew cover	collet attachment	chuck guard