Duct Pittsburgh-lock machine is the most widely used and most important in duct make industry. JSC company can supply nice lock forming machine. Our product use good material, good components and hardened and ground roll shafts. All of this can make sure machines with high quality, It will make you cost saving. FICom can supply all kinds of Lock forming machine, We also can design special lock forming machine base on the customer’s request.
Quantity: | |
---|---|
Pittsburgh Lock Profile:
Model | Motor (kw) | Capacity (mm) | Shapes | Weight (kg) | Dimension |
PL-20 | 1.5 | 0.3-1.0 | 200 | 1250×570×1000 | |
PL-22 | 2.2 | 0.5-1.2 | 280 | 1450×570×950 | |
PL-20R | 1.5 | 0.3-1.0 | 200 | 1250×570×1000 | |
PL-22R | 2.2 | 0.5-1.2 | 280 | 1450×570×1050 | |
PL-20CR | 1.5 | 0.3-1.0C < 0.8 | 220 | 1250×570×1000 | |
PL-22CR | 2.2 | 0.5-1.2C < 0.8 | 250 | 1450×570×1000 | |
PL-20F | 1.5 | 0.3-1.0 | 200 | 1250×570×1000 | |
PL-22F | 2.2 | 0.5-1.2 | 250 | 1450×570×1000 | |
PL-20BP | 1.5 | 0.3-1.0 | 250 | 1450×570×1000 | |
PL-22C | 2.2 | 0.5-1.2C < 0.8 | 220 | 1450×570×1000 | |
PL-22D | 2.2 | 0.5-1.2C < 0.8 | 280 | 1450×570×1000 | |
PL-22DR | 2.2 | 0.5-1.2C < 0.8 | 380 | 1450×570×1000 | |
PL-22CPS | 2.2 | 0.5-1.2C < 0.8 | 400 | 2300×700×1100 | |
PL-25 | 2.2 | 0.7-1.5 | 400 | 1650×570×900 | |
PL-25R | 2.2 | 0.7-1.5 | 450 | 1650×570×1050 | |
PL-25C | 2.2 | 0.7-1.5 < 1.0 | 380 | 1650×570×900 | |
PL-25CR | 2.2 | 0.7-1.5 < 1.0 | 450 | 1650×570×1050 | |
PL-25F | 2.2 | 0.7-1.5 | 300 | 1350×570×1000 | |
PL-25DR | 2.2 | 0.5-1.2C < 1.0 | 450 | 1650×570×950 | |
PL-30 | 3 | 1.0-2.0 | 500 | 1650×570×950 | |
PL-16R | 1.5 | 0.4-1.2 | 150 | 620×620×930 |